您好,欢迎来到16835网!
16835网

高速公路隔离墩模具规格 隔离墩模具成型技术

  2021-12-23 阅读:55

高速公路隔离墩模具作为典型钢模具的代表,在常用高速公路隔离墩模具中属于


较为稳定的一种,一般长度为2米,高速在80—100厘米之间进行选择,在预制的


时候需要带翻转边的位置。隔离墩模具成型技术,指的是将钢板经过裁剪、折弯


、焊接、打磨等工序的成型技术,它的优势很明显,成本低、效率高、节能环保


等,以确保良好的使用效果,在混凝土隔离墩成型时具有良好的成型效果,能够


达到所需精度,不需成型后再加工,并且隔离墩模具使用寿命长。

As a representative of typical steel molds, the expressway isolation 


pier mold is a relatively stable one among the commonly used Expressway 


isolation pier molds. The general length is 2m, and the high speed is 


between 80-100cm. The position with turnover edge is required during 


prefabrication. The mold forming technology of isolation pier refers to 

the forming technology of cutting, bending, welding, grinding and other 


processes of steel plate. It has obvious advantages, low cost, high 


efficiency, energy conservation and environmental protection, so as to 


ensure good use effect. It has good forming effect when forming 


concrete isolation pier, can achieve the required accuracy, and does 


not need to be processed after forming, And the service life of the 


isolation pier mold is long.

隔离带钢模具在使用过程中冲头很容易出现这段,弯曲和啃坏的现象,所以冲头


和冲套要随时进行更换。除了在使用之前要注意的问题,使用后的保养也是非常


重要的,在模具使用完以后对各处的零部件进行检查,完好无损后进行储存。



During the use of the isolated strip steel die, the punch is easy to 


bend and chew, so the punch and punch sleeve should be replaced at any 


time. In addition to the problems needing attention before use, the 


maintenance after use is also very important. After the mold is used, 


check the parts everywhere and store them after they are intac


免责声明:
本站部份内容系网友自发上传与转载,不代表本网赞同其观点;
如涉及内容、版权等问题,请在30日内联系,我们将在第一时间删除内容!